Need help with eratic cut path!!!

[JewKiddinMe]

Hi, I'm working on a dynatorch 12x6 with a hypertherm powermax 85. I'm very new to this table and program since my previous experience was on a plasmacam. My problem is when I load my ready DXF file onto the onboard converter and set the cut order. When it comes out the path has stray and bent lines. I use enroute for my editing and export it as a dxf simplified if that helps. If any other information is needed I am more than happy to give it. I have included pictures of the bad cut path and of how it should look. Would greatly appreciate the help!!!

Similar Threads:

• Need Help!- 11M Spindle Running Eratic
• Spindle load meter eratic
• Eratic Machine
• Eratic Machine2
• Need Help!- eratic recko 320 servo drives