Testing Re-Wired Stepper Motors

[kolias]

I'm relocating the control panel in my tabletop cnc and I have to add about 4 feet of four conductors cable to each stepper motor (4 motors + VFD Spindle). Its easier to cut the cable outside the control panel and solder the ends. After I finish each cable and before I apply power is there any test I can do to assure all work is good? I attach the driver of each motor for information.

Thanks

Similar Threads:

• Video Testing G0704, BF20L, PM25MV Controller with Stepper Motors using Mach3
• Help Bench Testing Stepper Motors
• Testing stepper motors
• 10 wired stepper
• testing bipolar stepper motors from ebay