G17/18 Problem

[silentstorm]

Hey there.
I have Maho 700C with Philips 432 controll. I used to work on machines with g17 plane but as we know maho worsk in G18.
I have changed const. for this in "0" as it says that is for G17 but nothing changed in contoing the machine

The "Y" axis is still on table but i want it on table.

Does someone know what am i missing

Thanks

[Superman]

G17/18/19 plane change only affects circular interpolation (the axis of the arc is perpendicular to the selected plane)

[silentstorm]

ohh, thought its affecting the axes too.
So there is no way in swapping Y and Z axis?
like on this video