Reply with QuoteGot it figured out.
Having trouble with a very steep tapered thread on OSP7000
Special purpose type thing, 2.75" dia change in 6" of run. Is that an I value of 1.604" starting 1/2" before the part? Can the control even handle that big of an I value?
G71X2.75z-6.I1.604D.05H.375F.15M33M73
Similar Threads:
Last edited by Doggitter; 01-11-2024 at 08:32 PM. Reason: more info
Re: Having trouble with a very steep tapered thread on OSP7000
Got it figured out.
Re: Having trouble with a very steep tapered thread on OSP7000
hyCan the control even handle ...as long as angle < 45*, and linear axis speed is slow in comparison to rapid, then no worries
if you wish for specific advice, please share more / kindly
kfigured out
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
