Reply with QuoteI would be cautious in doing this in a residential building shared with other tenants. You could be creating a sound/vibration problem for other areas of the building without realizing it.Originally Posted by Karl_T
attach machine to building
I plan to move to a condo or small house in a couple years. having to downsize my machine tools is going to be an issue. The small stuff just don't look rigid enough for my needs.
A fella on the zone attached his X3 to a brick wall and got a big improvement in rigidity. The light came on, "Build a machine designed to bolt to the corners and floor of a concrete block room."
Has somebody else allready done this?
Karl
Similar Threads:
- New Machine Build- Building another machine
- Newbie- Building a CNC machine
- Building my first CNC machine
- Build Thread- Building my first CNC machine
- building my CNC machine now
I would be cautious in doing this in a residential building shared with other tenants. You could be creating a sound/vibration problem for other areas of the building without realizing it.
And your tolerances will vary with the wind. Ha ha!
Matt
