Reply with QuoteHy, if you wont succed, i can help you with toolpath. Just provide cam profile dxf / kindly
Machining camshaft profile with radial tool in rotary mode
Hi.. we work in new edgecam 2023.1. I’m trying to machine cams on camshaft with ballnose cutter in radial orientation using only c z and x axis on turning machine. I have activated rotary mode but it doesn’t seems copy the cams profile. It try to machine it in 90deg angle inside the cams. Is there anything i need to activate or change?
Similar Threads:
- Need Help!- 2D Adaptive profile radial load?
- Problem- polar interpolation radial tool
- NEW : Radial Bi Rotary Engine
- Need Help!- take apart a parlec radial tool holder
Last edited by Delmin; 08-13-2023 at 10:28 AM.
Re: Machining camshaft profile with radial tool in rotary mode
Hy, if you wont succed, i can help you with toolpath. Just provide cam profile dxf / kindly
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
