Hi guys,

I'm new here, so I am not sure I found the best subform to ask about getting setup to cut parts from thin plastic sheet material. I have made a lot of "beginner" progress, but need some help and advice.

My goal is to create a small production process to cut parts from .187" thick sheets of Kydex and HDPE. I plan to work with sheets that are 24"x24" and after some trial and error, I believe I need a vacuum table to best accomplish this. But I have a lot of questions and would love to learn from others who work with plastic sheet material.

Let me know if I should be asking this elsewhere. But if I am in the right place, I'll explain more about what I am trying to do.

Thanks!

Similar Threads: