4' x 4' x 8" Router Build

[harryn]

I am looking for a similar motor mount setup.

The ones that I am finding on line are only 3mm for a nema 23 motor.

Are you fabricating those or have a supplier?

Thanks

Harry

[JonnyFive]

I am looking for a similar motor mount setup.

The ones that I am finding on line are only 3mm for a nema 23 motor.

Are you fabricating those or have a supplier?

Thanks

Harry

Hi Harry,

I made the X & Y motor mounts myself using a hand router and some laser cut templates. It took a while and they’re not perfect but they’re rigid.





The motor mount for my Z axis is a standard one from Aliexpress.

Hope that helps!

[peteeng]

Hi - I use these - you maybe able to modify them to use on its side. Peter

Aluminum Step servo motor Brackets motor mount HM12-57 HM12-60 HM15-57 HM15-60 HM15-80 HM15-86 HM20-80 HM20-86 - AliExpress

[JonnyFive]

That’s the sort of thing I’m using on my Z axis

[harryn]

Thanks JonnyFive - that is very impressive work.