- 3d digitizing services in the uk
-
Registered
3d digitizing services in the uk
does anyone know of any 3d scanning services in the uk especially the
midlands????????
any help would be greatly appreciated
Similar Threads:
-
-
Member
What sort of size and accuracy? I ask because I am in the midlands and have some digitizing capability. At the moment only on small objects but I am building a router onto which I have a renshaw probe to mount.
Graham
-
Registered
Graham S
Thanks for the reply.
The accuracy I am looking for is at least a tenth of a mm and the size of the object is 550mm by 312 mm approx.
Thanks
-
Member
Sorry for delayed reply, that is too big for may capability even when I finish the new machine.
-
Registered
Graham S
I've been reading your other posts and looked into the Sharp GP2D02...
http://www.junun.org/MarkIII/Info.jsp?item=30# ...It has it's own emitter built in but I think beter accuracy could be obtained by taking the unit apart and increasing the distance between the emitter and the sensor...
Anyways, are you using a laser rangefinder for the system you're building? Very curious.
regards,
Brennan
-
Registered
GRAHAM S
I have a guitar neck which I would like digitizing in cross sections (if possible). Would it be possible for you to do this on your machine??????????
- 3d digitizing services in the uk
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules