Are you sure you have that correct?
On our Morbidelli, the .pgm is a binary file. I wrote an Aspire post to create the .xxl file, and used WinXIso to create the .pgm file.
Hi All,
I I am trying to generate code for an SCM Routech with Aspire. I have a post processor and it generates the .pgm file I need. The issue is I don't have access to the CNC at the moment and I wan't to verify that the post is correct and I cannot read the code in the .pgm file as it is not a standard text file.
Would anyone be able to convert the pgm file to a .xxl file for me using WinXiso? Or possibly share WinXiso with me? Then I can read the file and verify that the code matches the sample files that I have been given.
Thanks in advance.
Richard
Similar Threads:
Are you sure you have that correct?
On our Morbidelli, the .pgm is a binary file. I wrote an Aspire post to create the .xxl file, and used WinXIso to create the .pgm file.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Yes.. My post generates a .pgm file l just can't read it at home. I know what the
Xxl file should look like so I want to use winxiso to convert from .pgm to .xxl. Which it can do. Then l can verify the output of my post.
Would you be able to convert a .pgm file for me?
Regards
Richard
.zip it and post it here and I'll see.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
SCM Xilog ISO (mm)-POST-Test.zip
Here you go.
If you can covert it to an .xxl that would be great.
Also if you are able to share Winxiso that would be good.
Thanks
Richard
Either you're not doing it right, or your machine is different than ours.
With our machine, .pgm files are binary. We output .xxl files from our CAM and convert to .pgm with WinXIso.
As such, your file doesn't work, as WinXIso expects .pgm files to be binary.
Renaming your file to .xxl, and running it through WinXIso results in a binary .pgm file, which I've attached.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thank you. I will look at the file you sent.
So it sounds like my post processor is changing the extension to a .pgm but not converting it to binary.
Thanks for your help.
Sent from my HUAWEI U8681 using Tapatalk
Is there anyway you could send me the winxiso .exe? This way I can debug this post before l get access to the controller.
Thanks again
Sent from my HUAWEI U8681 using Tapatalk
Hi All,
First apologize for my bad english. I'm use to Morbidelli Author 430S and i have a *.pgm problem. How can i found a download link for Winxiso.
Thanks.
Hi,
Please send me your e-mail so I can send you Winxiso.
Regards.
Hi there alias_s im also looking for WinXiso would you be able to help
Hola por casualidad tienen un postprocesador para un scmtech z25 estoy usando alphacam y no sé cómo convertir esos archivos .anc a pgm
I need a program to convert outout file from Aspire to .PGM for Moorbidelli U26.
Thank you
I looking for download link for Winxiso too.
my email is bnsnlai@hotmail.com
Please and thank you also looking for Winxiso
I assume that this is solved?
For the Information, I am able to use XConvertor(Maestro), WinXISO (Xilog) and CNVRT for older machines.