- Dividing Head
-
Registered
Dividing Head
Will the table of the IH Mill handle a 145 lb dividing head?
Similar Threads:
-
-
Registered
Got an answer
I spoke with Aaron today.
He said the IH mill table will handle the dividing head just fine as long as it isn't mounted too far out on the table. Since I will be milling gears mounted on a face plate near the centerline of the mill, there should be no problem.
I bought the Tiwanese Universal dividing head offered by MSC and others. Its a big muther with 10" swing and will cover all divisions from 2 through 1000.
-
Member
145 lbs, yep that's the big muther
Keep us updated if you have the time on your experiences in using it.
Ken
- Dividing Head
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules