Originally Posted by
Marty_Escarcega
OK, I have a Torque Cut 22 with the transmission.
I did not get the original Bridgeport Software disk.
I ran MAKEDISK. BAT from the command prompt. It created the backup disk BUT these files were not found:
PFM.EXE
WM.EXE
ACADMGR.BAT
MACROS.EMB
LEADCOMP.DAT
Machine is running Dos 6.2, Do I read correctly that you HAVE to run 6.2 and can't run 6.22? (I have 6.22, but not 6.2 and it appears not all of the DOS files are in the C:\DOS directory. I suspect the hard drive was replaced in the past but perhaps not all the files were restored to the drive.
Firstly, anyone with a Torq Cut 22 and the transmission run MAKEDISK and found they were missing these files?
What does the original Bridgeport Software disk cost? (I have the latest version I believe, BPC-MC=V4.79.22/6.89.57
Help with this appreciated. I wanted to also replace the hard drive with a DOM 256mb (Disk on Module) industrial IDE drive. I have done this before with another machine. And then just leave the hard disk in the machine disconnected as a back up besides the floppy.
Marty