Thanks Richard and Irfan
After Overhaulin' of my Machine, I found nothing but Backlash in the Nuts.. so I just installed the Homemade Backlash nuts to both of X and Y-axes...
Today I cut the Fish bowl and the machine work great
For 12mm deep Pocket operation I used 1" Barley Twist Tool, for Profile cut i used 6.5mm endmill and V-carving was done by 12.5mm 90 degree V-bit...
The Platter Length is 610mm and width 250mm and the thickness 16mm.... TOTAL TIME 45Minutes with toolchange...