Hi,
The ViperX machine with photos posted recently looks nice. Can you post the pricing for it please, and what sizes it's available in?
Thanks!
Dan
Also can not post prices on the forum like other threads , i don't want to get another thread closed
XZero cnc
also will have 40x wide supported machine now, that the 30x wide has all problems redone , and working on a 48x wide in the square rails once these ones are gone and out
XZero cnc
Will have both 48x in a low machine like the 40x and also one made of steel frame
XZero cnc
It is the same machining for all the ballscrews, the total length of the ballscrew includes the machining, so for 40x it would be 1003mm , and 24x would be 603mm total length with machining , they made the L2 with out adding the L3 in it , then added L3 after , making them around 10mm to short, no problem getting redone if to long , but to short there nothing can do , but the replacement ones should be here right away ,
XZero cnc
what do you mean by quality?
XZero cnc
The quality of machining is the quality of the ballscrew! The pictures show rough threads like they were cut with a die, not machined and the shaft looks pitted. If these are superficial then fine, but if they represent the quality of workmanship, then I would be concerned. All we have to judge anything is a picture and questions.
The ballscrew still have packing grease , dust , dust from surface grinding?on them , there not clean yet? i don't clean them till there going on machine?
i took pictures like that because if there remove from there bag , the company won't credit the machining cost , and say there not their ballscrews, also they send right away new ones that way if its there fault , the line on the one ballscrew is to show how much they over machined?
XZero cnc
the replacement for the 40x is on there way already , and other will be remachined to to fit next one down in size
XZero cnc
also the picture is 12x zoom , shot in super macro and a magnifying glass ,also had to use measuring tape as they don't believe digital calipers in pictures
XZero cnc
so im about to knock out some production guitar bodies with the hiwin router. ill be posting pics and such in a new thread in the music section over the weekend.