Problem 2 in one... Sub-Console Part, Sub-Console Error.


Results 1 to 1 of 1

Thread: 2 in one... Sub-Console Part, Sub-Console Error.

  1. #1
    Registered
    Join Date
    Jun 2015
    Location
    England
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default 2 in one... Sub-Console Part, Sub-Console Error.

    Hi there all,

    First post of many no doubt.

    I am wondering if any of you lovely people can help me out with a couple of questions...

    Question 1...

    I have a 2007 AXYZ 4010 Series Router Table. The LCD module for the sub-console stopped working properly a while ago when one of the operators dropped the unit.

    The screen is visible partially but could really do with replacing. The LCD module can be purchased from a shop that is a sub-division of AXYZ but the problem is... They want £70 for the bloody thing which is absolutely scandalous considering how much they actually are/WERE to buy from the manufacturer! I say WERE because this part is now obsolete according to the manufacturers data (Microtips Technology).

    Does anybody know if there is somewhere to source this part at a reasonable price or even a newer revision that will be compatible, if possible.

    The part number for the current module thats in the console is NMTC-S20200XMHYSAY-01.


    Many many thanks in advance.

    Harry

    *********************************
    Question 2... (Not as important)

    Anyone know what the error "Unknown Pendant" means and how to rectify?
    ***********************************
    EDIT: This has been resolved. Seems to be an issue with the flash memory board on the AMC controller. Gone back for repair.
    ************************************

    Similar Threads:
    Last edited by Harryhutch; 06-12-2015 at 01:44 AM. Reason: Question 2 Invalid


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

2 in one... Sub-Console Part, Sub-Console Error.

2 in one... Sub-Console Part, Sub-Console Error.