captzman193

Results 1 to 1 of 1

Thread: captzman193

  1. #1
    Member captzman193's Avatar
    Join Date
    Oct 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default captzman193

    I'm using a Gatton CNC with Mach3, Xylotex Plug and Play, and UC100. I am using Windows 7 on a desk top (originally started with Windows 10 on a lap top but still have the following problem). When I enable my limit and homing switches, E-stop and touch plate in ports and pins, I get lights illuminating on the diagnostics screen in Mach3 even though none of the switches are connected. If I enable the active low in ports and pins the lights go out, again even though the switches aren't wired. I disable the active low boxes and the lights come back on. Could there be a problem with the UC100?



  2. #2

    Default Re: captzman193

    We bookmarked this!

    Toiture Thetford Mines



  3. #3

    Default Re: captzman193

    It's for good articles.

    émondage saint-jerome



  4. #4

    Join Date
    Nov 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: captzman193

    I actually analyze it.

    abattage arbre



  5. #5

    Join Date
    Nov 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: captzman193

    We have something like yours.

    appelez-nous



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

captzman193

captzman193