I'm rewiring my CNC and have put it all back together. The first problem I had was that the Z axis was not working, the Y axis was only working in one direction no matter what jog button I pushed, while the X axis worked fine. So I bumbled my way around trying to configure Mach3 to work and it didn't solve any thing. Checked power to printer cable was going to check power to motors when I noticed nothing worked and have not been able to get any of the axis to move and now there does not seem to be any power getting to them. Have I have done something really dumb and thus burnt out my breakout board? The board I'm using is a xylotex 3 axis board. I'm new to electronics so don't really know what to test and what result to be looking for. Any takers on helping me solve this? Thanks
Brent

Similar Threads: