I'm rewiring my CNC and have put it all back together. The first problem I had was that the Z axis was not working, the Y axis was only working in one direction no matter what jog button I pushed, while the X axis worked fine. So I bumbled my way around trying to configure Mach3 to work and it didn't solve any thing. Checked power to printer cable was going to check power to motors when I noticed nothing worked and have not been able to get any of the axis to move and now there does not seem to be any power getting to them. Have I have done something really dumb and thus burnt out my breakout board? The board I'm using is a xylotex 3 axis board. I'm new to electronics so don't really know what to test and what result to be looking for. Any takers on helping me solve this? Thanks

Similar Threads: