Need Help! New Motor to SIEG X3


Results 1 to 3 of 3

Thread: New Motor to SIEG X3

  1. #1
    Member X3Miller's Avatar
    Join Date
    Sep 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Exclamation New Motor to SIEG X3

    I have just bought me a SIEG X3 Milling Machine, but it just got 1800 RPM. Can`t mill Aluminum.
    Is there anybody that can tell me if there is a replacement motor to this machine that have around 10.000 RPM and what I have to do to get this RPM.
    Must be 220 Volt.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2009
    Location
    USA
    Posts
    83
    Downloads
    0
    Uploads
    0

    Default Re: New Motor to SIEG X3

    Don’t limit yourself to 220 v motors only.

    You’ll be much better off getting a three phase motor and a variable frequency drive.

    Although the spindle bearings on the X3 may not do very well with speeds your looking to run.



  3. #3
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    956
    Downloads
    0
    Uploads
    0

    Default Re: New Motor to SIEG X3

    You need to look into changing pulley ratio's or a belt conversion if geared. You'd prob blow spindle bearings above 6k rpm.
    You can mill ally at those speeds, just a little bit slow. High DOC with lower SFM and feed. (unless using small size cutters).



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New Motor to SIEG X3

New Motor to SIEG X3

New Motor to SIEG X3