Increase precision of measurements

Results 1 to 2 of 2

Thread: Increase precision of measurements

  1. #1
    Member ArckyKun's Avatar
    Join Date
    Apr 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Increase precision of measurements

    Hello!

    Relatively new to WorkNC, my measurements are displaying at three decimal places and I would like to change that to four. I've been digging through settings but can't find anything to control that, anyone know where this elusive setting is?

    Similar Threads:


  2. #2
    Moderator
    Join Date
    Apr 2003
    Location
    Canada
    Posts
    1327
    Downloads
    0
    Uploads
    0

    Default Re: Increase precision of measurements

    Software configuration > Display settings > Dynamic coordinate display. You can set it from 1 decimal to 5 decimals.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Increase precision of measurements

Increase precision of measurements

Increase precision of measurements