radius correction

Results 1 to 3 of 3

Thread: radius correction

  1. #1
    Registered elemeNt86's Avatar
    Join Date
    Jul 2009
    Location
    Ingolstadt
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default

    Hello guys

    We are working for a while now with WorkNc and we are not really satisfied.
    There is something that makes me especially sick and tired:

    We have a DMU125 P hi dyn with millplus controller and I would like to use a milling radius correction so that I can also use regrind end milling cutters.

    Does anybody know a possibility without having to change the wnc program all the time?

    Regards ele



  2. #2
    Registered Bluebyter2000's Avatar
    Join Date
    Apr 2005
    Location
    Hessen
    Posts
    107
    Downloads
    0
    Uploads
    0

    Default

    What do you change in the wnc? The postprocessor usually does that. If you have nobody for radius correction, then go and get esomebody.

    It’s free you have a service contract.

    It’s only a line that needs to be changed but as i said just call them and you problem is solved!

    Regards Bluebyter thumbs-up.gif



  3. #3
    Registered elemeNt86's Avatar
    Join Date
    Jul 2009
    Location
    Ingolstadt
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default

    Merci you!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

radius correction

radius correction

radius correction