Clock for Christmas Present

Results 1 to 1 of 1

Thread: Clock for Christmas Present

  1. #1
    Member GigaWatt's Avatar
    Join Date
    Apr 2015
    Location
    United States
    Posts
    130
    Downloads
    0
    Uploads
    0

    Default Clock for Christmas Present

    My brother loves Art Deco inspired home furnishings, so I made this clock as a Christmas present for him. The clock body was machined from Peruvian Walnut and is two 3/4" thick pieces glued together. The wings, also walnut, are 3/4" with the outside portion pocketed down to 1/2". The base is 3/4" Tiger Maple. I used the cnc spoilboard as a jig to setup for gluing on the wings. I have the back of the clock body vcarved with his name and "Christmas 2018". I can't take total credit for the design. I remembered seeing the clock in Woodsmith Magazine several years ago, so I dug out my old copies and found it. The original design was half the size and had only 1 wing on each side, body was 3/4" thick and wings 1/2" thick. I also rounded over all of the top edges. I going to give it to him Saturday at his home for Christmas Dinner.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Clock for Christmas Present-ad-front-1-jpg   Clock for Christmas Present-ad-front-jpg   Clock for Christmas Present-ad-3-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Clock for Christmas Present

Clock for Christmas Present