forstner bits


Results 1 to 2 of 2

Thread: forstner bits

  1. #1
    Registered ToyMaker's Avatar
    Join Date
    May 2003
    Location
    United States
    Posts
    325
    Downloads
    0
    Uploads
    0

    Default forstner bits

    I picked up a number of OLD forstner bits (about 50) at a yard sale. Some of them have been rode hard and put away wet.
    Can anyone point me to a procedure for sharpening these that will preserve the geometry?

    TIA

    robotic regards,

    Tom
    = = = = =
    "Know where you're going or you'll go nowhere."
    - - Burda Vandeborne

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2007
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: forstner bits

    Hello Toymaker,

    Take a look at this vid

    Hope this helps!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

forstner bits

forstner bits