Need Help! I need help to speed and feed rate……. In MDF


Results 1 to 5 of 5

Thread: I need help to speed and feed rate……. In MDF

  1. #1
    Member Hans-U's Avatar
    Join Date
    Apr 2021
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default I need help to speed and feed rate……. In MDF

    Hi everyone

    I would like ask for help about spindle speed, feed rate, plunge rate and step down (mm/min).
    I'm only going to work in MDF, the shops selling those bits don’t know the rates.

    Cleaning bottom bits are 10, 15, 18, 22, 25, 30, 58 mm in diameter
    Needle tip rounder bits are 6, 8, 10, 12, 15, 16, 18, 22, 25, 32 mm in diameter
    V-Groove are 22mm-90°, 22mm-120°, 32mm-60°, 32mm-150°, 16mm-60° mm in diameter and angle
    Round bits are 6, 8, 10, 12, 16, 18, 22, 25, 32 mm in diameter
    Bowl is 45 mm in diameter

    Similar Threads:
    Attached Thumbnails Attached Thumbnails I need help to speed and feed rate……. In MDF-rounder-jpg   I need help to speed and feed rate……. In MDF-clean-jpg   I need help to speed and feed rate……. In MDF-angle-jpg   I need help to speed and feed rate……. In MDF-round1-jpg  

    I need help to speed and feed rate……. In MDF-bowl-jpg  


  2. #2
    Member
    Join Date
    Dec 2003
    Location
    East Anglia,England
    Posts
    912
    Downloads
    0
    Uploads
    0

    Default Re: I need help to speed and feed rate……. In MDF

    The answer is "it depends"-you provide no information about the machine that will be used and a cheap 3018 machine from ebay won't be able to run at the same rate as a large industrial machine.Take a look at this page https://www.shopbottools.com/ShopBot...sandSpeeds.pdf .There are others out there if you search for them and they will all give a starting point from which you may decide to experiment in any direction that seems interesting.



  3. #3
    Member Hans-U's Avatar
    Join Date
    Apr 2021
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: I need help to speed and feed rate……. In MDF

    It is a 4'x8' foot Chinese router, 6kw air spindle and servomotor



  4. #4
    Member Hans-U's Avatar
    Join Date
    Apr 2021
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: I need help to speed and feed rate……. In MDF

    I do not really find anything on those shapes on feed and speed, especially the round shapes I find nothing and what should feed and speed be increased by with larger diameter.



  5. #5
    Member
    Join Date
    Dec 2003
    Location
    East Anglia,England
    Posts
    912
    Downloads
    0
    Uploads
    0

    Default Re: I need help to speed and feed rate……. In MDF



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

I need help to speed and feed rate……. In MDF

I need help to speed and feed rate……. In MDF

I need help to speed and feed rate……. In MDF