Google long endmills
You can get them in even crazy long lengths, many vendors available.
Lots of combinations of OAL and cutting lengths.
Harvey Tool has just about anything you could want.
I am trying to find 2-3 flute 4" oal 1/4" end mills and I'm not finding any. Anyone have a reputable source? My machine runs about 320ipm. I am cutting hardwood by the way.
bonus points if any finds 1/8" as well but with 1/4" shaft
Similar Threads:
- Need Help!- "Face milling" with end mills (workpiece is smaller than end mill dia.)
- FastCut 2" end mill. 4 flutes 7-3/4" OAL, 4" cutting length. 1/2" radius, 79504
- Need Help!- Looking for 3.5-4" OAL 1/4" to 1/2" diameter Ball endmills.. anyone?
- *NEW Dura-Mill "Mixed Bag" 60° High Helix 3 Flute Solid Carbide End Mills - TiCN
- "low end" HF Spindle or "high end" router for about $1000?
Google long endmills
You can get them in even crazy long lengths, many vendors available.
Lots of combinations of OAL and cutting lengths.
Harvey Tool has just about anything you could want.
Jim Dawson
Sandy, Oregon, USA
I'm curious to know if you've been able to cut at that rate in hardwood with the cutter fully extended? Or are you just cleaning up the cut.