feed and speed for table surfacing bit


Results 1 to 2 of 2

Thread: feed and speed for table surfacing bit

  1. #1
    Member
    Join Date
    Mar 2011
    Location
    USA
    Posts
    333
    Downloads
    0
    Uploads
    0

    Default feed and speed for table surfacing bit

    I have a whiteside 6220 4 flute 2 inch diameter table surfacing bit. I am driving it with a 2.2kw spindle.
    What have you found to be a good feed rate, step over and spindle RPM for such a bit?
    I will be cutting baltic birch with no more than .020 depth of cut.
    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2011
    Location
    USA
    Posts
    333
    Downloads
    0
    Uploads
    0

    Default Re: feed and speed for table surfacing bit

    bump somebody must have numbers for a bit like this?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

feed and speed for table surfacing bit

feed and speed for table surfacing bit