feed and speed for table surfacing bit


Results 1 to 2 of 2

Thread: feed and speed for table surfacing bit

  1. #1
    Member
    Join Date
    Mar 2011
    Location
    USA
    Posts
    317
    Downloads
    0
    Uploads
    0

    Default feed and speed for table surfacing bit

    I have a whiteside 6220 4 flute 2 inch diameter table surfacing bit. I am driving it with a 2.2kw spindle.
    What have you found to be a good feed rate, step over and spindle RPM for such a bit?
    I will be cutting baltic birch with no more than .020 depth of cut.
    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2011
    Location
    USA
    Posts
    317
    Downloads
    0
    Uploads
    0

    Default Re: feed and speed for table surfacing bit

    bump somebody must have numbers for a bit like this?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

feed and speed for table surfacing bit

feed and speed for table surfacing bit

feed and speed for table surfacing bit