Buy a chinese spindle and VFD for $320. It's a far better option.
AIR COOLED 2.2KW SPINDLE MOTOR ER20 AND MATCHING 2.2KW INVERTER DRIVE VFD | eBay
hello everyone
I am new to cnc just got cnc machine ordered from cnc router parts. looking forward to getting into cnc
I am sure the question as been ask plenty of times about routers to use on the cnc if I knew where to look.
looking to choose between a Bosch 1617 evs dewalt 618 or porter cable 690
any suggestions or maybe point me to where it has already been discussed
thanks
Similar Threads:
Buy a chinese spindle and VFD for $320. It's a far better option.
AIR COOLED 2.2KW SPINDLE MOTOR ER20 AND MATCHING 2.2KW INVERTER DRIVE VFD | eBay
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)