Need Help! Materwood Project 309 - lost param.dat


Results 1 to 2 of 2

Thread: Materwood Project 309 - lost param.dat

  1. #1
    Registered
    Join Date
    Dec 2017
    Location
    Netherlands
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Materwood Project 309 - lost param.dat

    Dear people,

    Recently we bought a Masterwood Project 309. The battery on the RAM went dead and now we cannot open the D: drive….

    The CAM software works fine but we cannot control the machine. When opening the machine menu the message: ‘ cannot find D:/param.dat ’ appear.

    Does someone have a backup file? We have the manuals, but there is no info about this problem.

    Your help is very much appreciated.

    Thank you!

    From The Netherlands
    Willem

    Similar Threads:


  2. #2

    Default Re: Materwood Project 309 - lost param.dat

    Hello, I got it. ¨Please MP if you're interesting
    Regards



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Materwood Project 309 - lost param.dat

Materwood Project 309 - lost param.dat