Hello Perich1978, the photo that you uploaded is not viewable (at least by me). As far as I can tell, you followed the correct procedure, but somehow gremlins have made an appearance.
Perhaps you'd like to try a 2nd upload?
Hello Perich1978, the photo that you uploaded is not viewable (at least by me). As far as I can tell, you followed the correct procedure, but somehow gremlins have made an appearance.
Perhaps you'd like to try a 2nd upload?
Community Manager https://de.industryarena.com/
Looks like the tailstock is mounted on a support bracket to raise the centre line. Perhaps if you removed it and gave it a clean, you may find some stamped or casting numbers to give you a clue about it's origins.
The quill is missing for sure, but the winding handle seems to be in place, maybe remove it and you'll find it is a gear inside.
A tailstock quill usually has a rack gear cut along it.
I don't recognise it though, sorry.