WTT 4KW VFD Spindle for 1.5KW

[ClockMaster]

I purchased this spindle before I really knew what I needed and there was a good chance some beers were involved. I went way too big for what I need or will use or my machine can handle. It is well past the return period so I am hoping somoene can use this and is willing to trade or swap.

Here is a link to what I would like to trade for: 110V 1.5KW or equivalent.

https://www.amazon.com/Zhong-Hua-Jia...75&sr=8-2&th=1

Similar Threads:

• GS3 VFD 10hp/4Kw Chinese Spindle
• Combo spindle atc BT30 5.5kw rate 220V 400hz max 600hz 18000rpm + 5.5kw VFD sunfar
• Need Help!- Huanyang 4kw vfd + 3.5kw spindle settings
• 3kw spindle on a 4kw vfd
• Need Help!- 4kw Chinese VFD + Spindle - Input power?

[jlmccuan]

What is the base rpm of the motor you have. I may be looking for what you have.

[mactec54]

What is the base rpm of the motor you have. I may be looking for what you have.

If it is air cooled it will be around 12,000RPM as it has a max of 18,000RPM=300Hz note that it Amps to drive it if you are using single phase

[ClockMaster]

Giving this a bump as I have not logged into the new forums for a while.