Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503


Results 1 to 3 of 3

Thread: Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503

  1. #1
    Member rdc02271's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503

    Hello,

    I am looking for ( without sucess so far ) steel suppliers that sell plates/bars with these dimensions (minimum values)

    Steel Type Thickness/Height (mm) Width(mm)(minimum)
    1.7225 55 300
    1.0038 (S235JR) 65 300
    1.0503 (C45) 35 300

    I am also looking for supplier of AW-6060
    Thickness/Height (mm) Width(mm) (minimum)
    AW-6060 60 300

    Thank you for your help,
    Jorge



  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503

    None of those thicknesses are standard.

    1.7225 is close to 14ga (1.897mm)
    1.0038 is close to 18ga (1.214mm)
    1.0503 is close to 18ga (1.214mm)

    Just get them sheared to size

    ''I am also looking for supplier of AW-6060''

    6060 aluminum should be available in common sizes. Where are you located?

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member rdc02271's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503

    Hello,
    I should had specified this before: I am based in Europe.
    We are looking for thick AW-6060 plates : 40mm onwards.

    Thank you.
    Jorge


    Quote Originally Posted by Jim Dawson View Post
    None of those thicknesses are standard.

    1.7225 is close to 14ga (1.897mm)
    1.0038 is close to 18ga (1.214mm)
    1.0503 is close to 18ga (1.214mm)

    Just get them sheared to size

    ''I am also looking for supplier of AW-6060''

    6060 aluminum should be available in common sizes. Where are you located?




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503

Looking for steel suppliers of 1.7225 / 1.0038 / 1.0503