I have one - it's currently installed I'm not sure of the version number . There is a designation SL1001-R1
Needing a Campbell Designs (James Cullins) PC-2-Route PCB, version 1.7 or later.
Please PM with details.
keith20mm
Similar Threads:
I have one - it's currently installed I'm not sure of the version number . There is a designation SL1001-R1
Do you know if Campbell Design is still around? I don't seem to find them
Mr. James Cullins, designer of those boards, informs me that new Sound Logic PC-2-Route breakout boards are no longer available, from Campbell Designs or anywhere else.
However, you can likely repair a damaged board by chip replacement, in particular, the opro-isolators.
I rebuilt a lightning-struck board successfully, by replacement of the chips.