Reply with QuoteIf the motor can be configured for 230v then you can use a 1ph in - 3ph out VFD.
Al.
RF-45 single phase motor
I have a Rong Fu RF-45 (not a clone, an actual Rong Fu) that I purchased a few years ago and am just now getting setup in my garage. I realized my RF-45 has a 3 phase motor and being in a residential zone I only have single phase power so I either need to buy a phase converter or source a new motor.
Anybody have a single phase motor for sale that is compatible with this machine? I'm also happy to trade since I (probably) have no use for this 3 phase motor.
Or, if anybody has a single phase version of this machine and know the motor model number or dimensions (frame size and spindle diameter), that would also be helpful!
Re: RF-45 single phase motor
If the motor can be configured for 230v then you can use a 1ph in - 3ph out VFD.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Ebay has single phase to three phase vfd inverters for just over $100. Best thing you could do for this,as you dont have to mess with belts to change speed. Been there, done it,
Re: RF-45 single phase motor
If you have 240v single phase or can run a line or wire to the Garage, then a simple VFD Drive will get you going.Originally Posted by hazelnusse
What is the motor Hp
Mactec54
Posting Permissions
