looking for metal control cabinet


Results 1 to 8 of 8

Thread: looking for metal control cabinet

  1. #1
    Member
    Join Date
    Aug 2017
    Posts
    26
    Downloads
    1
    Uploads
    0

    Default looking for metal control cabinet

    I would like to get metal control cabinet as pictured from Canada or US .

    If anyone knows of a source I would appreciate it. Thanks.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails looking for metal control cabinet-operator-console-png  


  2. #2
    Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    3710
    Downloads
    0
    Uploads
    0

    Default Re: looking for metal control cabinet

    Automation Direct is my go to vendor for control panel hardware. https://www.automationdirect.com/adc...ing/enclosures

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member
    Join Date
    Aug 2017
    Posts
    26
    Downloads
    1
    Uploads
    0

    Default Re: looking for metal control cabinet

    Thanks for the link, they don't have anything like the one I'm looking for.
    Found one at Aliexpress but it is $ 400.00 CAN for shipping.



  4. #4
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    23173
    Downloads
    0
    Uploads
    0

    Default Re: looking for metal control cabinet

    If a unique design, have you considered custom from a local Tin Shop? Look for one that has a decent reputation, you can get any hardware from Hammond etc.
    You can save money by painting it yourself if need be.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  5. #5
    Member
    Join Date
    Aug 2017
    Posts
    26
    Downloads
    1
    Uploads
    0

    Default Re: looking for metal control cabinet

    Al, I have come to the same conclusion. The one from Aliexpress is $ 800.00 CAN. with shipping.
    I should be able to get it made locally for that or hopefully less.



  6. #6
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    23173
    Downloads
    0
    Uploads
    0

    Default Re: looking for metal control cabinet

    I would suggest obtaining any hardware needed before manuf. so they can incorporate it.
    I have done this on occasion where off the shelf was expensive.
    For any operator panel I have used a local engraver that reverse engraves Lamacoid, I just supply him a DXF file.
    Al.

    Attached Thumbnails Attached Thumbnails looking for metal control cabinet-dscf014-jpg  
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  7. #7
    Member
    Join Date
    Aug 2017
    Posts
    26
    Downloads
    1
    Uploads
    0

    Default Re: looking for metal control cabinet

    I want to leave the top open and make my own top panel for all the buttons and switches I need.
    This controller will be used for 3 machines, one at a time of course.
    I have yet to figure out if I can use the same stepper drivers for all 3 machines or use separate sets of them.



  8. #8
    Member
    Join Date
    Sep 2005
    Location
    United States
    Posts
    1636
    Downloads
    0
    Uploads
    0

    Default Re: looking for metal control cabinet

    Quote Originally Posted by liefer View Post
    I want to leave the top open and make my own top panel for all the buttons and switches I need.
    This controller will be used for 3 machines, one at a time of course.
    I have yet to figure out if I can use the same stepper drivers for all 3 machines or use separate sets of them.
    You know have you checked with salvage yards or recycling (junk) yards near you? Sometimes things like that get thrown out when the plant or company closes down. The one near me, has lots of stuff like that out in the yard and they sell it for scrap metal price, unless your willing to pay more .

    Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP


  9. #9

    Join Date
    Jun 2019
    Location
    ha noi
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    hope you find a solution soon



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

looking for metal control cabinet

looking for metal control cabinet

looking for metal control cabinet