I need to sell a 1.5 KW VFD that is a Huanyang Clone. After realizing it was a clone, I thought I had been had, but after figuring out how to wire it up it works as well as the Huanyang 2.2 KW VFD I purchased later. I only still use the later one because it’s 2.2kW instead of 1.5kW to run my 3HP spindle which is also 2.2 kW. Whatever you decide to get make sure you set the correct frequency. I initially set mine at 50 and burned up my spindle. My VFD needed to be set to 400 Hz.