- Just IN- Budget solution for small screws
-
Member
Budget solution for small screws
Dear forum members,
I am looking for simple budget turning solution
for production of small screws from Ti6Al4V.
Currently we are using Tornos Deco 10, 13 and GT26
and I am in discussion with Tornos for DT13
however theirs offer for equipped DT13
with equipment, bar feeder SBF-213,
HP pump, automatic fire fighting device
and oilmist extractor for about 180k EUR
looks for me like a bit too much.
Could you recommend any budget solution
for production of screws with hex stamping
for parts like that:
Diameters between 2 and 4 mm
Length between 6 and 50 mm
Batch between 1k to 20k
Material Ti6Al4V (HP pump required)
Similar Threads:
-
-
Member
Re: Budget solution for small screws
I'm in australia and for those qty's I contract it to a repetition engineer. If your on the east coast of Oz or happy to deal Internationally I can recommend a company. Peter
- Just IN- Budget solution for small screws
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules