I am building my CNC router on a budget. I am looking for a used 2.2KW water cooled splindle and VFD. Let me know if anyone has old VFD and spindle that they want to get rid of. I'm located in Canada.
I am building my CNC router on a budget. I am looking for a used 2.2KW water cooled splindle and VFD. Let me know if anyone has old VFD and spindle that they want to get rid of. I'm located in Canada.
Good luck with that, I would not buy a used one, if you have a Router you could use that until you where able to get a new Spindle
All VFD Drives can be run on Single Phase up to a size that the current is to much for the supply, so you don't need any special Single Phase VFD Drive