A Taig mill with a rotary table would be ideal for this use. There's a fellow called Les Caine who sells them in the UK, under the "Peatol" brand.
Hello everyone. i want to make small figures out of aluminium. can anyone recommend a small machine for this? there are lots of engravers but will need one powerful enough to cut and machine small sections of aluminium. the aluminium billet size will probably be 50x50x30mm so not very big
thanks
zac
Similar Threads:
A Taig mill with a rotary table would be ideal for this use. There's a fellow called Les Caine who sells them in the UK, under the "Peatol" brand.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]