Good Lead on Power Supply


Results 1 to 3 of 3

Thread: Good Lead on Power Supply

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    12
    Downloads
    0
    Uploads
    0


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    32753
    Downloads
    0
    Uploads
    0

    Default Re: Good Lead on Power Supply

    Something that big won't be cheap.

    PS-15N56 - 1500W 56V Power Supply - AnTek Products Corp

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: Good Lead on Power Supply

    Thanks for the tip,

    As you well know, Unregulated Power Supplies can momentarily go beyond their rated output. These claim 200% for a few minutes. This will allow for a smaller one to be used. These Tecnik Servos can peak at 12.5 amps each.

    This one will work in those conditions.

    PS-10N56 - 1000W 56V Power Supply - AnTek Products Corp

    Plus, what are the odds that all three motors will go into overload at the same time?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Good Lead on Power Supply

Good Lead on Power Supply