AH-HA driver board wanted


Results 1 to 3 of 3

Thread: AH-HA driver board wanted

  1. #1
    *Registered User* bmiketuc's Avatar
    Join Date
    Sep 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default AH-HA driver board wanted

    I have a bridgeport boss running mach 3 with an AH-HA drive control box. I have 1 drive board that does not always work. I can usually get it going but would like to find a good used board if any are available. If not I'll have to buy 3 new drivers and re-wire my whole machine.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails AH-HA driver board wanted-img_2921-jpg   AH-HA driver board wanted-img_2922-jpg  


  2. #2
    Registered
    Join Date
    Dec 2004
    Location
    United States
    Posts
    123
    Downloads
    4
    Uploads
    0

    Default Re: AH-HA driver board wanted

    Quote Originally Posted by bmiketuc View Post
    I have a bridgeport boss running mach 3 with an AH-HA drive control box. I have 1 drive board that does not always work. I can usually get it going but would like to find a good used board if any are available. If not I'll have to buy 3 new drivers and re-wire my whole machine.

    I have 2 full boxed with 4 drive cards and I should have a couple spare drive cards and controller boards ,,, I think there the 12amp



  3. #3
    *Registered User* bmiketuc's Avatar
    Join Date
    Sep 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: AH-HA driver board wanted

    Send me an email if you got one you would like to sell bmiketuc@gmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

AH-HA driver board wanted

AH-HA driver board wanted