AH-HA driver board wanted

[bmiketuc]

I have a bridgeport boss running mach 3 with an AH-HA drive control box. I have 1 drive board that does not always work. I can usually get it going but would like to find a good used board if any are available. If not I'll have to buy 3 new drivers and re-wire my whole machine.

Similar Threads:

• Dyna Myte 2800 XYZU Stepper Driver Board Wanted.
• New Machine Build- Help deciding which breakout board or driver board etc to use!
• Replacing TB6560 driver board's driver chip. Is it possible?
• Bosch Z15 board wanted
• Driver help wanted

[D.D.Machine]

I have a bridgeport boss running mach 3 with an AH-HA drive control box. I have 1 drive board that does not always work. I can usually get it going but would like to find a good used board if any are available. If not I'll have to buy 3 new drivers and re-wire my whole machine.

I have 2 full boxed with 4 drive cards and I should have a couple spare drive cards and controller boards ,,, I think there the 12amp

[bmiketuc]

Send me an email if you got one you would like to sell bmiketuc@gmail.com