Aspire does wrapped 4th axis, and has for several years. Version 9.5 just adds some new features to make this easier/more powerful.1. Aspire 9.5 claims to be able to do 4-axis now. Is that true?
Sorry, can't help with the other questions.
Have a CNC with Richauto A11 3-axis DSP using DMA860H drives with a push button on the x-axis to do rotary work if needed.
1. Aspire 9.5 claims to be able to do 4-axis now. Is that true?
2 If true on Aspire 9.5, does it makes sense for me to upgrade to Richauto A18 4-axis DSP, add another DMA860H drive and rewire the push button to handle the c-axis?
3. Would I need a reset switch for c-axis when doing the go to home position on startup? Not sure how this would work.
4. Is there any recommendation of where I could get the DSP and drive in the US?
Thank you in advance for any guidance I can get from the group.
Sincerely,
Asim
Similar Threads:
Aspire does wrapped 4th axis, and has for several years. Version 9.5 just adds some new features to make this easier/more powerful.1. Aspire 9.5 claims to be able to do 4-axis now. Is that true?
Sorry, can't help with the other questions.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thank you for the clarification on Aspire 9.5. Starting point at least.