Where can I buy a Taizi (Chinese) stepper motor

[Escritar]

I would like to purchase another stepper motor for my rotary fixture. The stepper motor that is currently on the fixture is made by Taizi, a Chinese brand.

The marking on the Taizi motor is below:

57BHH56P-560A-29

Thank You,
Roger

Similar Threads:

• Need Help!- Chinese CNC stepper motor stalling
• Problem- Chinese stepper motor stall issue, replacement questions
• Need Help!- Motor stalling.. optimize stepper performance using Chinese driver DQ542MA
• Chinese stepper motor drive problems

[awerby]

You don't have to buy the same brand of stepper; just find one with the same specs. What makes you think you need to replace it anyway? About 99% of the time, the reason a stepper doesn't work isn't a broken motor (unless you tried taking it apart). It's usually a bad driver, a faulty connection, or a mechanical problem.

[Escritar]

Thank you for the response Andrew.

My current stepper does not have a problem. I'm looking for an additional stepper motor, either a Taizi 57BHH56P-560A-29 stepper motor, or one with the same specifications.

I do not have the specific specs for the Taizi motor, therefore, if someone does have a specification sheet for the Taizi 57BHH56P-560A-29 stepper motor, I would appreciate a copy to help me find another motor with the same specification.

Thank You,
Roger