- Looking for CNC lathe no larger than 30x70 footprint
-
Registered
Looking for CNC lathe no larger than 30x70 footprint
Looking for a CNC lathe for re contouring gun barrels. I'm guessing that a 12x36 would be fine but boy would I like a 11x26, shop space is at a premium with all the other machines I have. I will be :
1. Re contouring barrels so I'll need a tailstock
2. Crowning/beveling the muzzle outer edge
3. Cutting 2 vertical keys ( 3 horizontal keys too but I'm guessing that the milling machine will have to keep doing that.)
I would guess this means I'll need a 4 post tool station
Besides re contouring three different configurations of barrels I'll also have it do gas pistons.
The only option I've seen is the microkinetics 1236 and I have found one used but it's 10 hours away with no proof of life. I am in Jerome Michigan and would prefer to drive no more than 4 hours.
Similar Threads:
-
- Looking for CNC lathe no larger than 30x70 footprint
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules