Hardinge HC Turret Parts

[EmeraldIsleforg]

I just picked up an HC Chucker with the 8 position turret that I'm going to convert to CNC. Unfortunately it is missing the center turret shaft with the gear on the bottom and spline on top, the rod gear(helical I think) that is between the handle to rotate and lock the turret and the turret shaft, the bottom turret bearing and sleeve/spacer. It is also missing the 5C collet draw tube parts. It has a little hydraulic unit for the collet closer but nothing else. The taper is in the spindle.

Anyone know where I can find these parts for a reasonable price?

Thanks!

Mike

Similar Threads:

• Need Help!- Hardinge HXL turret
• Problem- HARDINGE Conquest T51, turret prob.
• Hardinge Turret Lathe
• Hardinge Quest 51 Turret Help!
• Newbie- Hardinge T51 turret problem

[Mach_List]

Hey there! I might be able to help actually. I work for a company that locates machinery/tooling/equipment/parts for free and for very reasonable prices. PM me or email me at machinerylistingserviceimp@gmail.com

-Alissa

[mctraps]

Howdy, email me tom at 02Again dot com I have some chnc parts as well as a complete machine with a fagor control I will sell cheaper then you could possibly build one

tom