lathe that I will use for a buld project


Results 1 to 3 of 3

Thread: lathe that I will use for a buld project

  1. #1
    Registered
    Join Date
    Nov 2016
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default lathe that I will use for a buld project

    I like to know what lathe that every one started out with before converting to and CNC I'm not looking for CNC lathe as looking to convert
    Its going to be a big project an hoping to give up the smokes on the way

    Similar Threads:


  2. #2
    Registered coherent's Avatar
    Join Date
    Apr 2003
    Location
    Arizona, USA
    Posts
    463
    Downloads
    2
    Uploads
    0

    Default Re: lathe that I will use for a buld project

    First, you don't need to ask your question in more than one place. Folks will see it.
    I started with a little Grizzly 7x14. it was cheaper to buy a lathe for machining and putting threads on the screw ends on one of my first CNC router builds than the machine shop wanted to charge me to do it. Plus I'd never had a lathe, so great learning experience. Eventually sold it and bought a bigger lathe.



  3. #3
    Registered
    Join Date
    Nov 2016
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    The cost of that lave to be sent to Australia is to much for my pocket. Does anyone know another one and I can buy in Australia



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

lathe that I will use for a buld project

lathe that I will use for a buld project