Need Help! Jigsaw pieces not fitting


Results 1 to 4 of 4

Thread: Jigsaw pieces not fitting

  1. #1
    Member
    Join Date
    Feb 2005
    Location
    Australia
    Posts
    53
    Downloads
    0
    Uploads
    0

    Question Jigsaw pieces not fitting

    I'll come back to this one.

    Made some mistakes

    Prboz

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Jigsaw pieces not fitting-e__projects_test-join-model-1-pdf  
    Last edited by Prboz; 11-15-2014 at 06:51 PM. Reason: Please delete if possible


  2. #2
    Member
    Join Date
    Feb 2005
    Location
    Australia
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: Jigsaw pieces not fitting

    Ok So I've had a play trying to get the parts to match but for some reason they seem to be the thickness of the cutter (1.4mm) out on the radius only.

    The distance between the maiting flat sections seem to be ok.

    I'm a bit lost as to why this is happening.

    Any Ideas



  3. #3
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: Jigsaw pieces not fitting

    It sounds like you're not offsetting for the radius of your cutter. There's a screen in the Profile dialog that asks you if you want to cut on the line, inside it, or outside it; you probably want to cut outside.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


  4. #4
    Member
    Join Date
    Feb 2005
    Location
    Australia
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: Jigsaw pieces not fitting

    I have set the cutter compensation for a 1.4mm cutter. It is strange as it is only the radius and the inside lines which are an issue. The parts back to back ok, so the width is not a problem
    The radius is incorrect and the taper is out aswell.
    Will keep trying things and see what happens




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Jigsaw pieces not fitting

Jigsaw pieces not fitting