Step2Linear Adapters Available

Results 1 to 3 of 3

Thread: Step2Linear Adapters Available

  1. #1
    Registered
    Join Date
    Dec 2009
    Location
    USA
    Posts
    443
    Downloads
    0
    Uploads
    0

    Default Step2Linear Adapters Available

    I had no luck with PANJO Classifieds. I hope Larry & CNCZONE will allow it. I have 4 of the Step2Linear boards I purchased from Larry for a project. I decided to take a different approach. They were mounted but never powered up. Would like to see someone get some use out of them. I will take $225 for the 4, which includes the programming cable for tuning them and USPS First Class Priority Shipping.

    For those that don't know, Step2Linear will take a standard Step & Direction, input signal, an encoder input from the servo motor and output a +/- 0-10V signal for most analog servo amplifiers (which essentially closes the servo loop between the motor/servo amp/step2linear. The servo motors need to have encoders.
    More info on Larry's site: http://032c30a.netsolhost.com/catalo...Lin_manual.pdf

    The communications cable to tune the servos is included and you can download vipertune from Viperservo,com
    I'll post when they are sold.

    PM me directly if interested.
    Marty

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Step2Linear Adapters Available-20170311_145251-jpg  


  2. #2
    Registered
    Join Date
    Dec 2009
    Location
    USA
    Posts
    443
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Marty_Escarcega View Post
    I had no luck with PANJO Classifieds. I hope Larry & CNCZONE will allow it. I have 4 of the Step2Linear boards I purchased from Larry for a project. I decided to take a different approach. They were mounted but never powered up. Would like to see someone get some use out of them. I will take $225 for the 4, which includes the programming cable for tuning them and USPS First Class Priority Shipping.

    For those that don't know, Step2Linear will take a standard Step & Direction, input signal, an encoder input from the servo motor and output a +/- 0-10V signal for most analog servo amplifiers (which essentially closes the servo loop between the motor/servo amp/step2linear. The servo motors need to have encoders.
    More info on Larry's site: http://032c30a.netsolhost.com/catalo...Lin_manual.pdf

    The communications cable to tune the servos is included and you can download vipertune from Viperservo,com
    I'll post when they are sold.

    PM me directly if interested.
    Marty
    My boards have found a new home.
    Marty



  3. #3
    Registered
    Join Date
    Feb 2004
    Location
    USA
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: Step2Linear Adapters Available

    Are the step2 linear still for sale?

    JOHN



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Step2Linear Adapters Available

Step2Linear Adapters Available