Trying to get the Viper BX7 to work

Results 1 to 2 of 2

Thread: Trying to get the Viper BX7 to work

  1. #1
    Registered vegastony12's Avatar
    Join Date
    Jul 2014
    Location
    sin city
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Trying to get the Viper BX7 to work

    Hello all! trying to get the breakout board BX7 to work with a VFD, Just cannot figure it out? upon sending the command from Mach say S1000 =10v is OK and S500=5v ETC..Fine, but trying to turn on and off a 12v relay is a NO GO! Anyone have a BX7 with any success? Any help is greatly appreciated.

    Thanks

    Similar Threads:


  2. #2
    Company Representative
    Join Date
    Feb 2007
    Location
    canada
    Posts
    931
    Downloads
    0
    Uploads
    0

    Default Re: Trying to get the Viper BX7 to work

    Send me your XML file and i will take a look at it.

    Larry

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trying to get the Viper BX7 to work

Trying to get the Viper BX7 to work